Hard Wiring Marshall Cliff Jack Output. The links across the 4 pins. Since you can't have switching, make sure there is.
And low and behold.i have no idea how to wire them. Output jacks are the plastic switching/shorting cliffs type. The links across the 4 pins.
The primary lead is the short lug that connects to the longer bent flange, and the long lug is the power/battery switch that connects to the short bent flange. Web hiwatt wired their speaker jacks such that if there was no speaker plugged into either jack the speaker outputs would be shorted. I prefer a switch when the jacks are hard to see, and in general.
The idea being that the ht fuse would pop under high current draw but without damage to the ot caused by flyback. Generally, marshalls don't use the shorting contacts on their speaker output jack sockets, or at least, they're not used to short across the output in the way that fenders do. It oxidizes somewhat, and the contact.
The cliff jack that's feeding his speaker cab must be getting hot. Wiring 4x12 marshall diagram 1960 speaker cabinet diagrams. Web marshall cliff jacks and switchcraft were a handshake from day one.
The amp gets pushed, running near c. Since you can't have switching, make sure there is. Cliff jacks do have a switching mechanism built in so you need to test the proper solder tab.
The amp gets pushed, running near capacity. Web has anyone out there seen this problem: Tough, molded grade 1 black nylon body.
